All-in-One Stain & Finish

Description

Vermont Natural Coatings all-in-one Stain & Finish delivers clear, vibrant color and uncompromising durability, all in one. Made with patented Polywhey technology to establish new performance and environmental standards in the stain & finish category. Easy-to-use and soap and water cleanup make our Stain & Finish the ideal choice. To ensure beautiful, uniform color, pre-treat wood with our Pre-Stain Wood Conditioner.

Large volume customers please contact us for a customized finish.

Available in 15 beautiful tones. Our wood tones are a semi-transparent stain that provides tone without overpowering the grain of the wood. Applying multiple coats of finish will continue to darken the color allowing you the control to build to your ideal color. Ideal for wood cabinets, doors, trim, moldings + furniture projects.

Product Details

• Rich, uniform finish
• Easy application with brush, clean lint-free cloth, paint pad or spray
• Ideal for wood cabinets, doors, trim, moldings + furniture projects
• Not recommended for use on floors
• One quart will cover approximately 125-150 sq/ft.
• Neutral odor
• Soap & water cleanup
• Meets highest environmental standards in US + Canada (Less than 30g/L VOC)

Additional Product Information:

• Surfaces must be clean, dry and free of any grease, glue or other contaminants prior to staining.
• For previously stained wood, sand surface lightly to help adhesion.
• Remove dust with a lightly dampened cloth. To ensure beautiful, uniform color, pre-treat wood with our Pre-Stain Wood Conditioner.

Application:

1. Stir well prior to use.
2. Always test the finish on a sample piece of wood to confirm the desired appearance.
3. Using a brush, pad or clean cloth, apply thin, even coats in the direction of the grain, taking care to avoid puddling. Overlap strokes, always maintaining a wet edge. If desired, wipe off excess material within five minutes.
4. Finish will be dry and ready to re-coat in two hours.
5. If a deeper tone is desired, apply additional coats. For best results, apply in temperatures between 65 and 80 degrees Fahrenheit and relative humidity 40%-60%. Low temperature and high humidity may lengthen dry time. For optimum protection and beauty, topcoat with our clear PolyWhey Furniture or PolyWhey Wipe-on Finish.